automobilių detalių žinynas
 | Viso detalių : 0 |
Mano miestas
Pagrindinis meniu
Transporto priemonė: SL 350; VIN numerio dalis: 230456
Grupė: 50 RADIATOR - 330 INDEPENDENT HEATING
| # | Kodas | Pavadinimas |
|---|---|---|
| 010 | A 2305000398 | HEATER UNIT |
| 015 | A 0005000553 | BURNER INSET |
| 020 | A 2305010335 | SCREENING PLATE |
| CONTROL UNIT COVERING | ||
| 030 | A 2305060540 | BRACKET |
| 040 | A 2305060640 | HOLDER DELIV. SPEC. |
| 050 | A 0054910801 | MUFFLER |
| 060 | A 2304920001 | EXHAUST PIPE |
| 070 | A 2304920214 | TAILPIPE |
| 080 | A 0049976890 | CLAMP |
| TO TAILPIPE | ||
| 24-26/ 16 MM | ||
| 090 | A 1294921702 | EXHAUST PIPE |
| 100 | A 2305064235 | SHAPED HOSE DEL. SPEC. |
| CONTROL UNIT TO WATER PUMP | ||
| 110 | A 0079972090 | CLAMP |
| HOSE TO HEATER UNIT | ||
| 12-22 MM | ||
| 110 | A 0009954005 | HOSE CLAMP |
| ASPIRATOR HOSE | ||
| 27 MM | ||
| 110 | A 0009954005 | HOSE CLAMP |
| ASPIRATOR HOSE | ||
| 27 MM | ||
| 110 | A 0009954005 | HOSE CLAMP |
| HOSE TO HEATER UNIT | ||
| 27 MM | ||
| 130 | A 2305060034 | HOSE |
| 140 | A 2305064335 | MOLDED HOSE |
| ASPIRATOR HOSE | ||
| 150 | A 2305064135 | MOLDED HOSE |
| HEATER TO CONTROL UNITS | ||
| 160 | A 0042032475 | THERMOSTAT ELEMENT |
| THERMOSTAT | ||
| 170 | A 2305060740 | BRACKET |
| 180 | A 2305060240 | BRACKET |
| ATTACHMENT FOR HEATER | ||
| Repalced by: A 2305061140 | ||
| 180 | A 2305061140 | HOLDER |
| ATTACHMENT FOR HEATER | ||
| 190 | N 910112006003 | HEXAGON NUT |
| ATTACHMENT FOR HEATER | ||
| M6 | ||
| 200 | A 2305010435 | SCREENING PLATE |
| CABLE COVERING | ||
| 210 | A 0009905492 | EXPANSION RIVET |
| TO CABLE COVER | ||
| 6 MM | ||
| 220 | A 2305840238 | STICKER |
| TO CONTROL UNIT | ||
| 230 | A 2038201097 | RECEIVER |
| 230 | A 2218200097 | RECEIVER |
| 240 | A 2038200997 | TRANSMITTER |
| 240 | A 2218200497 | TRANSMITTER |
| 250 | N 000000000995 | BATTERY |
| FOR TRANSMITTER | ||
| IEC 86-MN 21 | ||
| 300 | A 2304765326 | FUEL HOSE |
| AT HEATER | ||
| 310 | A 0009955010 | CLAMP |
| FUEL LINE LEADING TO HEATER UNIT | ||
| 320 | A 2304760801 | LINE |
| FROM PUMP TO HEATER UNIT | ||
| Repalced by: A 2304763001 | ||
| 320 | A 2304763001 | LINE |
| FROM PUMP TO HEATER UNIT | ||
| 330 | A 2304765126 | FUEL HOSE |
| FROM FUEL-OIL PUMP TO HEATER | ||
| 340 | A 2304765026 | FUEL HOSE |
| FUEL TANK LINE TO AUXILIARY PUMP | ||
| 350 | A 0004707694 | AUXILIARY PUMP |
| FUEL OIL PUMP USED AUXILIARY HEATER | ||
| 351 | A 1405453528 | PIN BUSHING HOUSING |
| FUEL METERING PUMP | ||
| 2 PIN JPT;Y23 | ||
| 352 | A 0005402705 | REP.SET CONTACT |
| 1.00 MM2 JPT | ||
| 360 | A 1245068140 | BRACKET |
| TO FUEL PUMP | ||
| 370 | A 2104780012 | RUBBER MOUNT |
| ON DELIVERY SIDE | ||
| 380 | A 2104780112 | RUBBER MOUNT |
| ON SUCTION SIDE | ||
| 390 | A 0079970890 | CLAMP |
| HOSES TO FUEL PUMP | ||
| 9 MM - 9.5 MM | ||
| 400 | A 0049973090 | CLAMP |
| 8 MM | ||
| 410 | A 0039900251 | SCREWED INSERT |
| TO FUEL PUMP BRACKET | ||
| 420 | A 2304760701 | LINE |
| FROM FUEL TANK TO FUEL-OIL PUMP | ||
| 450 | A 0019954365 | CLAMP |
| FASTENING BRAKE LINE AND AUXILIARYHEATER LINE | ||
| 460 | A 1299950065 | LINE HOLDER |
| FUEL LINE MOUNTING | ||
| 470 | A 2109950065 | CLAMP |
| TO MOUNT FUEL LINES | ||
| 470 | A 2109950065 | CLAMP |
| TO MOUNT FUEL LINES | ||
| 480 | A 1263280181 | BUFFER |
| ANT-CHAFE PROTECTION TO LONGITUDINAL MEMBER | ||
| 480 | A 1263280281 | BUFFER |
| ANT-CHAFE PROTECTION TO LONGITUDINAL MEMBER | ||
| 500 | A 2305064435 | MOLDED HOSE |
| FROM HEATER UNIT TO PIPE LINE | ||
| 510 | A 2305001072 | PIPELINE |
| AT RIGHT SIDE MEMBER | ||
| 520 | A 2309950105 | CLAMP |
| HOSE TO PIPE LINE | ||
| 24.0/26.8 MM | ||
| 520 | A 2309950105 | CLAMP |
| FROM PIPE LINE TO CHECK VALVE | ||
| 24.0/26.8 MM | ||
| 520 | A 2309950105 | CLAMP |
| MOLDED HOSE TO PARTITION WALL | ||
| 24.0/26.8 MM | ||
| 520 | A 2309950105 | CLAMP |
| SHAPED HOSE TO ENGINE | ||
| 24.0/26.8 MM | ||
| 530 | N 910112006003 | HEXAGON NUT |
| LINE ATTACHMENT | ||
| M6 | ||
| 530 | N 910112006003 | HEXAGON NUT |
| MOLDED HOSE TO CHECK VALVE | ||
| M6 | ||
| 540 | A 2305064635 | MOLDED HOSE |
| FROM PIPE LINE TO CHECK VALVE | ||
| 550 | A 2305065035 | MOLDED HOSE |
| FROM NON-RETURN VALVE TO PART. WALL | ||
| 560 | A 2305064835 | MOLDED HOSE |
| FROM NON-RETURN VALVE TO ENGINE | ||
| 560 | A 2305064935 | MOLDED HOSE |
| FROM NON-RETURN VALVE TO ENGINE | ||
| 565 | A 0002036164 | VALVE |
| AT PARTITION PANEL | ||
| 570 | A 2305060840 | BRACKET |
| HOSE TO ENGINE | ||
| 570 | A 2305060940 | BRACKET |
| HOSE TO ENGINE | ||
| 800 | A 2305404708 | WIRING HARNESS |
| INDEPENDENT HEATING | ||
| 800 | A 2305403806 | WIRING HARNESS |
| INDEPENDENT HEATING | ||
| 800 | A 2305404905 | WIRING HARNESS |
| INDEPENDENT HEATING | ||
| 800 | A 2305409305 | WIRING HARNESS |
| INDEPENDENT HEATING | ||
| 900 | A 2105403681 | PIN BUSHING HOUSING |
| CONTROL UNIT INDEPENDENT HEATING | ||
| 6-PIN MQS;N33 | ||
| 901 | A 0005402305 | REP.SET CONTACT |
| 0.5 MM2 MQS | ||
| 901 | A 0005402405 | REP.SET CONTACT |
| 0.75 MM2 MQS | ||
| 905 | A 0075459726 | RECEPTACLE HOUSING |
| CONTROL UNIT INDEPENDENT HEATING | ||
| 2-PIN JPT;N33 | ||
| 906 | A 0005402805 | REP.SET CONTACT |
| 2.5 MM2 JPT | ||
| 910 | A 0015402881 | PLUG HOUSING |
| TELESTART | ||
| 6-PIN MQS;A6/1 | ||
| 910 | A 0005459403 | COVER |
| TO A 001 545 51 40 | ||
| 911 | A 0165454126 | FEMALE CONTACT |
| 0.25-0.5 MM2 MQS | ||
© 2010-2013 UAB "RPV" Paslaugų teikimo sąlygos - Privatumo politika - Kopijuoti ir naudoti komerciniais tikslais draudžiama