automobilių detalių žinynas
 | Viso detalių : 0 |
Mano miestas
Pagrindinis meniu
Transporto priemonė: TYP 180 BM 120.010, .011, .000-.002; VIN numerio dalis: 120001
Grupė: 83 HEATING AND VENTILATION
| # | Kodas | Pavadinimas |
|---|---|---|
| X XXXXXXXXXXXX | PART NAME MISSING | |
| HEATING AND VENTILATION | ||
| A 101208300362 | AIR DUCT, LEFT | |
| UP TO CHASSIS NO. 45 17418 EXCEPT FOR 45 17307 | ||
| 001 | A 101208301762 | AIR DUCT, LEFT |
| FROM CHASSIS NO. 45 17419 IN ADDITION FITTED IN 45 17307 | ||
| 002 | A 101208300462 | AIR DUCT, RIGHT |
| 002 | A 101208300462 | AIR DUCT, RIGHT |
| FROM CHASSIS NO. 45 17419 IN ADDITION FITTED IN 45 17307 | ||
| A 101208301162 | AIR DUCT, RIGHT | |
| UP TO CHASSIS NO. 45 17418 EXCEPT FOR 45 17307 | ||
| 003 | A 101208310043 | FLAP |
| FOR AIR DUCT | ||
| 004 | A 101208310048 | AXLE |
| FOR FLAP | ||
| 005 | A 101208310082 | BUSHING |
| FOR FLAP | ||
| 006 | A 101208310033 | LEVER |
| FOR FLAP | ||
| THREADED PIN | ||
| M 3X6 DIN 553-5 S FOR LEVER AT AXLE | ||
| 007 | A 101208300020 | BRACKET |
| FOR FUSE BOX | ||
| HOLLOW RIVET | ||
| A 4X6X8 DIN 7331 FOR BRACKET AT AIR DUCT, RIGHT | ||
| WASHER | ||
| 5,3 DIN 125 FOR AXLE AT AIR DUCT | ||
| HEX. NUT | ||
| AM 5 DIN 439-5 S FOR AXLE AT AIR DUCT | ||
| 010 | A 101208300129 | TIGHTENING STRAP |
| FOR AIR DUCT | ||
| LENS-HD.SCREW | ||
| AM 6X22 DIN 7985-4S FOR TIGHTENING STRAP AT SCOOP AND AIR DUCT | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR TIGHTENING STRAP AT SCOOP AND AIR DUCT | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR TIGHTENING STRAP AT SCOOP AND AIR DUCT | ||
| 011 | A 101208350501 | HEAT EXCHANGER, LEFT |
| 012 | A 101208350601 | HEAT EXCHANGER, RIGHT |
| 013 | A 0008350098 | GASKET |
| RING IN CONTROL VALVE, LEFT AND RIGHT | ||
| 015 | A 101208310193 | INTERMEDIATE LAYER |
| FOR HEAT EXCHANGER | ||
| 016 | A 101208300050 | BRACKET |
| FOR BOWDEN CABLE | ||
| 017 | A 101208350092 | SEALING RUBBER |
| FOR HEAT EXCHANGER AT AIR DUCT | ||
| LENS-HD.SCREW | ||
| AM 5X15 DIN 7985-4S FOR HEAT EXCHANGER AT AIR DUCT | ||
| 018 | A 101208330131 | WIRE DIA |
| 1.25-MM, 460-MM LONG FOR AIR FLAP | ||
| 019 | A 0009880172 | WIRE SPIRAL, 395 MM LONG |
| FOR AIR FLAP STATE LENGTH WHEN ORDERING | ||
| 020 | INSULATING HOSE, | |
| 350-MM LONG B 5 X 6,2 SW. DIN 40621 FOR WIRE SPIRAL STATE LENGTH WHEN ORDERING | ||
| 021 | A 121368310089 | FIXING SCREW |
| FOR WIRE CABLE AT FLAP | ||
| 022 | A 121368310090 | BUSHING |
| FOR WIRE CABLE AT FLAP | ||
| WASHER | ||
| 4,3 DIN 433 FOR WIRE CABLE AT FLAP | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE AT FLAP | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE AT FLAP | ||
| 023 | A 1369950601 | FIXING CLAMP |
| FOR WIRE CABLE AT AIR DUCT | ||
| LENS-HD.SCREW | ||
| AM 4X10 DIN 7985-4S FOR WIRE CABLE AT AIR DUCT | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE AT AIR DUCT | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE AT AIR DUCT | ||
| 025 | A 101208330331 | WIRE CABLE, LEFT |
| AT CONTROL COCK FOR CABLE FOR HEATING | ||
| 026 | A 101208330431 | WIRE CABLE, RIGHT |
| AT CONTROL COCK FOR CABLE FOR HEATING | ||
| 027 | A 0009880172 | WIRE SPIRAL, 565 MM LONG |
| FOR WIRE CABLE TO CONTROL COCK STATE LENGHT WHEN ORDERING | ||
| 028 | INSULATING HOSE, | |
| 520-MM LONG B 5 X 6,2 SW. DIN 40621 STATE LENGHT WHEN ORDERING | ||
| LOCKING WASHER | ||
| 4 DIN 6799 FOR WIRE CABLE AT CONTROL COCK | ||
| 029 | A 1369950601 | FIXING CLAMP |
| FOR WIRE CABLE AT HEAT EXCHANGER | ||
| LENS-HD.SCREW | ||
| AM 4X10 DIN 7985-4S FOR WIRE CABLE AT HEAT EXCHANGER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE AT HEAT EXCHANGER | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE AT HEAT EXCHANGER | ||
| 035 | A 101208310094 | HOSE, 175 MM LONG |
| FROM PIPE LINE TO HEAT EXCHANGER, BOTTOM | ||
| 036 | A 101208310194 | HOSE, 80 MM LONG |
| FROM PIPE LINE TO HEAT EXCHANGER, TOP | ||
| HOSE STRAP | ||
| 5 X 0,35 N 263 FOR HOSE FROM PIPE LINE AT HEAT EXCHANGER, TOP, LEFT AND BOTTOM, RIGHT STATE LENGTH WHEN ORDERING | ||
| HOSE CLAMP | ||
| WSN 5 N 262 FOR HOSE FROM PIPE LINE AT HEAT EXCHANGER, TOP, LEFT AND BOTTOM, RIGHT | ||
| 038 | A 101208310599 | SEALING RUBBER, |
| LEFT AND RIGHT BETWEEN BODY FRONT END AND AIR DUCT | ||
| LENS-HD.SCREW | ||
| AM 6X15 DIN 7985-4S FOR AIR DUCT AT BODY FRONT END | ||
| WASHER | ||
| 6,4 DIN 125 FOR AIR DUCT AT BODY FRONT END | ||
| HEX.-HD.SCREW | ||
| M 6X65 DIN 931-8 G FOR AIR DUCT AT BODY FRONT END | ||
| 040 | A 101208301133 | OPERATION, LEFT |
| FOR HEATING AND AIR CONTROL | ||
| 041 | A 101208301233 | OPERATION, RIGHT |
| FOR HEATING AND AIR CONTROL | ||
| 042 | A 1369950601 | FIXING CLAMP |
| FOR FIXING BOWDEN CABLE, CABLE FOR VENTILATION AND HEATING | ||
| HEX.-HD.SCREW | ||
| M 4 X 15 DIN 933-8 G FOR FIXING CLAMP AT OPERATION | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR FIXING CLAMP AT OPERATION | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR FIXING CLAMP AT OPERATION | ||
| HEX.-HD.SCREW | ||
| M 4 X 12 DIN 933-8 G FOR OPERATION AT INSTRUMENT PANEL | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR OPERATION AT INSTRUMENT PANEL | ||
| A 0009902591 | CAGE CLIP WITH NUT | |
| FOR OPERATION AT INSTRUMENT PANEL | ||
| 045 | A 101808300036 | HANDLE FOR OPERATION |
| FOR HEATING AND VENTILATION | ||
| 046 | A 101808330091 | RUBBER SLEEVE |
| 047 | A 1869970681 | GROMMET |
| FOR BOWDEN CABLE PASSAGE, FOR FLAP AND CONTROLCOCK THROUGH DASHBOARD | ||
| 048 | A 121368310089 | FIXING SCREW |
| FOR WIRE CABLE, FLAP AT OPERATION LEVER | ||
| 049 | A 1360720050 | BUSHING |
| FOR WIRE CABLE, FLAP AT OPERATION LEVER | ||
| WASHER | ||
| 4,3 DIN 433 FOR WIRE CABLE, FLAP AT OPERATION LEVER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE, FLAP AT OPERATION LEVER | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE, FLAP AT OPERATION LEVER | ||
| A 121368310089 | FIXING SCREW | |
| FOR WIRE CABLE, CONTROL COCK AT OPERATION LEVER | ||
| A 1360720050 | BUSHING | |
| FOR WIRE CABLE, CONTROL COCK AT OPERATION LEVER | ||
| WASHER | ||
| 4,3 DIN 433 FOR WIRE CABLE, CONTROL COCK AT OPERATION LEVER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE, CONTROL COCK AT OPERATION LEVER | ||
| HEX. NUT | ||
| M 4 DIN 934-5S FOR WIRE CABLE, CONTROL COCK AT OPERATION LEVER | ||
| A 101208300354 | ANNULAR NOZZLE, LEFT | |
| FOR AIR OUTLET, VENTILATION FOR SIDE WINDOWS UP TO CHASSIS NO. 35 02964 EXCEPT FOR 35 02930, 02952, 02953, 02954 | ||
| A 101208300454 | ANNULAR NOZZLE, RIGHT | |
| FOR AIR OUTLET, VENTILATION FOR SIDE WINDOWS UP TO CHASSIS NO. 35 02964 EXCEPT FOR 35 02930, 02952, 02953, 02954 | ||
| A 101208300554 | REPLACED BY | |
| 10 120 830 07 54 TOGETHER WITH 1 ANNULAR NOZZLE, RIGHT 10 120 830 08 54 FOR AIR OUTLET, VENTILATION FOR SIDE WINDOWS FRO | ||
| 055 | A 101208300754 | ANNULAR NOZZLE, LEFT |
| FOR AIR OUTLET, VENTILATION FOR SIDE WINDOWS ONLY VALID FOR REPLACEMENT DELIVERY | ||
| A 101208300654 | REPLACED BY | |
| 10 120 830 08 54 TOGETHER WITH 1 ANNULAR NOZZLE, LEFT 10 120 830 07 54 FOR AIR OUTLET, VENTILATION FOR SIDE WINDOWS FROM | ||
| 056 | A 101208300854 | ANNULAR NOZZLE, RIGHT |
| FOR AIR OUTLET, VENTILATION FOR SIDE WINDOWS ONLY VALID FOR REPLACEMENT DELIVERY | ||
| 057 | A 101208310024 | FLAP |
| A 101878310215 | PIN WITH HANDLE | |
| UP TO CHASSIS NO. 35 02964 EXCEPT FOR 35 02930, 02952, 02953, 02954 | ||
| 058 | A 101208310015 | PIN WITH HANDLE |
| FROM CHASSIS NO. 35 02965 IN ADDITION FITTED IN 35 02930, 02952, 02953, 02954 | ||
| 059 | A 101868310034 | PRESSURE SPRING |
| LOCKING WASHER | ||
| 2,3 DIN 6799 | ||
| LENS-HD. COUNTERSUNK | ||
| SHEET METAL SCREW S 2,9X6,5 DIN 7983 VERCHROMT FOR ANNULAR NOZZLE AT INSTRUMENT PANEL UP TO CHASSIS NO. 35 02964 EXCEPT | ||
| 060 | A 101208310032 | WIRE CLAMP |
| FOR ANNULAR NOZZLE AT INSTRUMENT PANEL FROM CHASSIS NO. 35 02965 IN ADDITION FITTED IN 35 02930, 02952, 02953, 02954 | ||
| 061 | A 1209931610 | RELEASE SPRING |
| FOR ANNULAR NOZZLE AT INSTRUMENT PANEL FROM CHASSIS NO. 35 02965 IN ADDITION FITTED IN 35 02930, 02952, 02953, 02954 | ||
| 062 | A 101208310388 | HOSE |
| FROM AIR DUCT TO DEFROSTER NOZZLE | ||
| 063 | A 101208310188 | HOSE, 160 MM LONG |
| FROM DEFROSTER NOZZLE TO ANNULAR NOZZLE FOR VENTILATION OF SIDE WINDOWS | ||
| 064 | A 101208310026 | TRANSFER FITTING |
| FOR DEFROSTER NOZZLE AT HOSE, VENTILATION FOR SIDE WINDOWS | ||
| 070 | A 101208300542 | CONTROL FLAP, |
| LEFT AND RIGHT AT AIR OUTLET, CROSS DUCT | ||
| 071 | A 101208310034 | SPRING |
| FOR CONTROL FLAP AT CROSS DUCT | ||
| A 0009940645 | SPRING NUT | |
| FOR CONTROL FLAP AT CROSS DUCT | ||
| LENS-HD. SHEET | ||
| METAL SCREW S 4,8X13 DIN 7981 FOR CONTROL FLAP AT CROSS DUCT | ||
| 072 | A 101208300115 | FEED LINE |
| AT BODY FRONT END, BOTTOM | ||
| 073 | A 101208300016 | RETURN FLOW |
| LINE AT BODY FRONT END, TOP | ||
| A 101208300216 | RETURN FLOW | |
| LINE AT BODY FRONT END, TOP | ||
| 074 | A 101208300068 | FIXING CLAMP |
| FOR RETURN FLOW LINE AT BODY FRONT END, LEFT | ||
| 075 | A 101208300168 | FIXING CLAMP |
| FOR FEED LINE AND RETURN FLOW LINE AT BODY FRONT END, LEFT AND RIGHT | ||
| 075 | A 101208300168 | FIXING CLAMP |
| FOR FEED LINE AND RETURN FLOW LINE AT BODY FRONT END, LEFT AND RIGHT | ||
| LENS-HD.SCREW | ||
| AM 6X15 DIN 7985-4S FOR FIXING CLAMP | ||
| LENS-HD.SCREW | ||
| AM 6X15 DIN 7985-4S FOR FIXING CLAMP | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR FIXING CLAMP | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR FIXING CLAMP | ||
| A 101808300850 | BRACKET FOR HEATING TUBE | |
| COUNTERSUNK SCREW | ||
| AM 6X15 DIN 7987-4S FOR BRACKET AT BODY FRONT END | ||
| HOSE STRAP | ||
| 5X0,35 N 263 FOR FEED LINE AND RETURN FLOW LINE AT HOSE, HEAT EXCHANGER STATE LENGTH WHEN ORDERING | ||
| HOSE CLAMP | ||
| WSN 5 N 262 FOR FEED LINE AND RETURN FLOW LINE AT HOSE, HEAT EXCHANGER STATE LENGTH WHEN ORDERING | ||
| 076 | A 101208310097 | HOSE, 360 MM LONG |
| FROM PIPE LINE TO ENGINE, TOP | ||
| 077 | A 101208310197 | HOSE, 320 MM LONG |
| FROM PIPE LINE TO ENGINE, BOTTOM | ||
| HOSE STRAP | ||
| 5 X 0,35 N 263 FOR HOSES AT ENGINE, FEED LINE AND RETURN FLOW LINE STATE LENGTH WHEN ORDERING | ||
| HOSE CLAMP | ||
| WSN 5 N 262 FOR HOSES AT ENGINE, FEED LINE AND RETURN FLOW LINE | ||
| 080 | A 101208300301 | SCOOP, LEFT |
| UP TO CHASSIS NO. 55 13920 INSECT SCREEN 10 120 830 07 18 HAS TO BE DELIVERED IN ADDITION | ||
| 081 | A 101208300401 | SCOOP, RIGHT |
| UP TO CHASSIS NO. 55 13920 INSECT SCREEN 10 120 830 07 18 HAS TO BE DELIVERED IN ADDITION | ||
| A 101208300518 | INSECT SCREEN, LEFT | |
| UP TO CHASSIS NO. 55 13920 | ||
| A 101208300618 | INSECT SCREEN, RIGHT | |
| UP TO CHASSIS NO. 55 13920 | ||
| 083 | A 101208300718 | INSECT SCREEN, |
| LEFT AND RIGHT FROM CHASSIS NO. 55 13921 | ||
| LENS-HD. SHEET | ||
| METAL SCREW S 4,8X16 DIN 7981 FOR INSECT SCREEN AT SCOOP | ||
| 084 | A 0009940745 | CLIP NUT |
| FOR INSECT SCREEN AT SCOOP | ||
| WASHER | ||
| 5,3 DIN 125 FOR INSECT SCREEN AT SCOOP | ||
| HEX.-HD.SCREW | ||
| M 6X15 DIN 933-8 G FOR SCOOP AT WHEEL ARCH | ||
| 085 | A 0009870241 | RUBBER WASHER |
| FOR SCOOP AT WHEEL ARCH | ||
| 086 | A 1205450176 | WASHER |
| FOR SCOOP AT WHEEL ARCH | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR SCOOP AT WHEEL ARCH | ||
| 087 | A 0009902291 | CAGE CLIP WITH NUT |
| FOR SCOOP AT WHEEL ARCH | ||
| A 101208300119 | DEFROSTER NOZZLE, LEFT | |
| SEE GROUP 62 | ||
| A 101208300219 | DEFROSTER NOZZLE, RIGHT | |
| SEE GROUP 62 | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| SPECIAL REQUEST - BLOWER | ||
| 090 | A 101208300208 | BLOWER 6 V |
| IN SCOOP | ||
| 091 | A 0008350175 | CARBON BRUSH |
| 092 | A 101208350185 | FAN |
| 093 | A 101208350128 | RUBBER MOUNTING |
| FOR FASTENING BLOWER | ||
| LENS-HD. SCREW | ||
| AM 5X12 DIN 7985-4 S FOR BLOWER AT SCOOP | ||
| WASHER | ||
| 5,3 DIN 433 FOR BLOWER AT SCOOP | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR BLOWER AT SCOOP | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| ORNAMENTAL BARS | ||
| 100 | A 101208380518 | ORNAMENTAL BAR, LEFT, TOP |
| FOR AIR INLET, FRONT AT ENGINE HOOD | ||
| 101 | A 101208380618 | ORNAMENTAL BAR, |
| RIGHT, TOP FOR AIR INLET, FRONT AT ENGINE HOOD | ||
| LENS-HD.SHEET METAL SCREW | ||
| S 2,9X6,5 DIN 7981 VERCHROMT FOR ORNAMENTAL BAR, TOP AT ENGINE HOOD, UPP ER PART | ||
| 103 | A 101208301766 | ORNAMENTAL BAR, |
| LEFT, CENTER FOR AIR INLET | ||
| 104 | A 101208301866 | ORNAMENTAL BAR, |
| RIGHT, CENTER FOR AIR INLET | ||
| 105 | A 101208301966 | ORNAMENTAL BAR, |
| LEFT, BOTTOM FOR AIR INLET | ||
| 106 | A 101208302066 | ORNAMENTAL BAR, |
| RIGHT, BOTTOM FOR AIR INLET | ||
| LENS-HD.SCREW | ||
| AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR AT COVER PLATE AND WHEEL ARCH | ||
| LENS-HD.SCREW | ||
| AM 4X18 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR AT COVER PLATE AND WHEEL ARCH | ||
| WASHER | ||
| 4.3 DIN 125 FOR ORNAMENTAL BAR AT COVER PLATE AND WHEEL ARCH | ||
| WASHER | ||
| A 4.3 DIN 9021 FOR ORNAMENTAL BAR AT COVER PLATE AND WHEEL ARCH | ||
| A 0009841155 | WASHER | |
| FOR ORNAMENTAL BAR AT COVER PLATE AND WHEEL ARCH | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR ORNAMENTAL BAR AT COVER PLATE AND WHEEL ARCH | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR ORNAMENTAL BAR AT COVER PLATE AND WHEEL ARCH | ||
| LENS-HD.SCREW | ||
| AM 4X10 DIN 7985-4 S FOR ORNAMENTAL BAR AT COVER PLATE, INSIDE, CENTER AND BOTTOM | ||
| WASHER | ||
| 4,3 DIN 125 FOR ORNAMENTAL BAR AT COVER PLATE, INSIDE, CENTER AND BOTTOM | ||
| WASHER | ||
| A 4,3 DIN 9021 FOR ORNAMENTAL BAR AT COVER PLATE, INSIDE, CENTER AND BOTTOM | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR ORNAMENTAL BAR AT COVER PLATE, INSIDE, CENTER AND BOTTOM |
© 2010-2013 UAB "RPV" Paslaugų teikimo sąlygos - Privatumo politika - Kopijuoti ir naudoti komerciniais tikslais draudžiama