automobilių detalių žinynas
 | Viso detalių : 0 |
Mano miestas
Pagrindinis meniu
Transporto priemonė: TYP 190D BM 121.110 - .111; VIN numerio dalis: 121111
Grupė: 83 HEATING AND VENTILATION
| # | Kodas | Pavadinimas |
|---|---|---|
| X XXXXXXXXXXXX | PART NAME MISSING | |
| HEATING AND VENTILATION | ||
| 001 | A 101208301762 | AIR DUCT, LEFT |
| 002 | A 101208300462 | AIR DUCT, RIGHT |
| 003 | A 101208310043 | FLAP |
| FOR AIR DUCT | ||
| 004 | A 101208310048 | AXLE |
| FOR AIR FLAP | ||
| 005 | A 101208310082 | BEARING BUSHING |
| 006 | A 101208310033 | LEVER |
| THREADED PIN | ||
| M 4X6 DIN 553-5 S FOR LEVER AT SHAFT | ||
| WASHER | ||
| 5,3 DIN 125 FOR AXLE AT AIR DUCT | ||
| HEX. NUT | ||
| AM 5 DIN 439-5 S FOR AXLE AT AIR DUCT | ||
| 010 | A 101208300129 | TIGHTENING STRAP |
| FOR AIR DUCT | ||
| LENS-HD. SCREW | ||
| AM 6X22 DIN 7985-4 S FOR TIGHTENING STRAP AT AIR DUCT | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR TIGHTENING STRAP AT AIR DUCT | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR TIGHTENING STRAP AT AIR DUCT | ||
| 011 | A 101208350501 | HEAT EXCHANGER, LEFT |
| 012 | A 101208350601 | HEAT EXCHANGER, RIGHT |
| 12a | A 1208350120 | CONTROL VALVE, LEFT |
| 12b | A 1208350220 | CONTROL VALVE, RIGHT |
| 013 | A 0008350098 | GASKET |
| O-RING IN CONTROL VALVE, LEFT AND RIGHT | ||
| A 101208310193 | INTERMEDIATE LAYER | |
| FOR HEAT EXCHANGER MOLTOPREN, 12 MM THICK | ||
| A 0009830298 | INTERMEDIATE LAYER | |
| FOR HEAT EXCHANGER MOLTOPREN, 12 MM THICK ORDER BY THE METER | ||
| 016 | A 1208300050 | BRACKET |
| FOR BOWDEN CABLE-HEATING | ||
| 017 | A 101208350092 | SEALING RUBBER |
| FOR HEAT EXCHANGER AND BRACKET AT AIR DUCT | ||
| LENS-HEAD SHEET | ||
| METAL SCREW B 4,8X19 DIN 7981 FOR HEAT EXCHANGER AND BRACKET AT AIR DUCT | ||
| LENS-HEAD SHEET | ||
| METAL SCREW B 4,8X22 DIN 7981 FOR HEAT EXCHANGER AND BRACKET AT AIR DUCT | ||
| A 101208330131 | REPLACED BY | |
| 1,25 Ø DIN 2076 | ||
| 018 | WIRE 440 MM LONG | |
| 1,25 Ø DIN 2076 FOR AIR FLAP ORDER BY THE METER | ||
| 019 | A 0009880172 | WIRE SPIRAL, 345 MM LONG |
| FOR FLAP ORDER BY THE METER | ||
| 020 | INSULATING HOSE | |
| 300-MM LONG B 5X6,2 SW DIN 40621 ORDER BY THE METER | ||
| 021 | A 121368310089 | FIXING SCREW |
| FOR WIRE CABLE AT FLAP | ||
| 022 | A 121368310090 | BUSHING |
| FOR WIRE CABLE AT FLAP | ||
| WASHER | ||
| 4,3 DIN 433 FOR WIRE CABLE AT FLAP | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE AT FLAP | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE AT FLAP | ||
| 023 | A 1369950601 | FIXING CLAMP |
| FOR WIRE CABLE AT AIR DUCT | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985-4 S FOR WIRE CABLE AT AIR DUCT | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE AT AIR DUCT | ||
| HEX. NUT | ||
| M 4 DIN 934 - 5 S FOR WIRE CABLE AT AIR DUCT | ||
| A 101208330331 | WIRE CABLE, LEFT | |
| FOR CONTROL COCK | ||
| 025 | A 401218330331 | WIRE CABLE, LEFT |
| FOR CONTROL COCK | ||
| A 101208330431 | WIRE CABLE, RIGHT | |
| FOR CONTROL COCK | ||
| 026 | A 401218330431 | WIRE CABLE, RIGHT |
| FOR CONTROL COCK | ||
| 027 | A 0009880172 | WIRE SPIRAL, 525 MM LONG |
| ORDER BY THE METER | ||
| 028 | INSULATING HOSE, | |
| 480-MM LONG B 5X6,2 SW DIN 40621 ORDER BY THE METER | ||
| LOCKING WASHER | ||
| 4 DIN 6799 FOR WIRE CABLE AT CONTROL COCK | ||
| 029 | A 1369950601 | FIXING CLAMP |
| FOR WIRE CABLE AT HEAT EXCHANGER | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985-4 S FOR WIRE CABLE AT HEAT EXCHANGER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE AT HEAT EXCHANGER | ||
| HEX. NUT | ||
| M 4 DIN 934 - 5 S FOR WIRE CABLE AT HEAT EXCHANGER | ||
| 035 | A 101208310094 | HOSE FOR |
| FEED PIPE, 175-MM LONG FROM PIPE LINE TO HEAT EXCHANGER, BOTTOM | ||
| 036 | A 101208310194 | HOSE FOR |
| RETURN FLOW PIPE, 80-MM LONG FROM PIPE LINE TO HEAT EXCHANGER, TOP | ||
| HOSE STRAP | ||
| 5X0,35X210 MM LANG N 263 FOR HOSE AT HEAT EXCHANGER, TOP AND BOTTOM ORDER BY THE METER | ||
| HOSE CLAMP | ||
| WSN 5 N 262 FOR HOSE AT HEAT EXCHANGER, TOP AND BOTTOM ORDER BY THE METER | ||
| 038 | A 101208310599 | SEALING RUBBER |
| BETWEEN BODY FRONT END AND AIR DUCT | ||
| LENS-HD. SCREW | ||
| AM 6X15 DIN 7985-4 S FOR AIR DUCT AT BODY FRONT END | ||
| WASHER | ||
| 6,4 DIN 125 FOR AIR DUCT AT BODY FRONT END | ||
| HEX. -HD. SCREW | ||
| M 6X65 DIN 931-8 G FOR AIR DUCT AT BODY FRONT END | ||
| HEX. -HD. SCREW | ||
| M 6X60 DIN 931-8 G FOR AIR DUCT AT BODY FRONT END | ||
| HEX. -HD. SCREW | ||
| M 6X60 DIN 931-8 G FOR AIR DUCT AT BODY FRONT END | ||
| 040 | A 101208301133 | OPERATION, LEFT |
| FOR HEATING AND AIR CONTROL | ||
| 041 | A 101208301233 | OPERATION, RIGHT |
| FOR HEATING AND AIR CONTROL | ||
| 042 | A 1369950601 | FIXING CLAMP |
| HEX. -HD. SCREW | ||
| M 4X15 DIN 931-8 G FOR FIXING CLAMP AT OPERATION | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR FIXING CLAMP AT OPERATION | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR FIXING CLAMP AT OPERATION | ||
| HEX. -HD. SCREW | ||
| M 4X12 DIN 933-8 G FOR OPERATION, MOUNTING ANGLE AT INSTRUMENT PANEL | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR OPERATION, MOUNTING ANGLE AT INSTRUMENT PANEL | ||
| A 0009902591 | CAGE CLIP WITH NUT | |
| FOR OPERATION, MOUNTING ANGLE AT INSTRUMENT PANEL | ||
| 043 | A 1208330114 | BEARING, LEFT |
| FOR OPERATION LEVER, HEATING OPERATION | ||
| A 1208330214 | BEARING, RIGHT | |
| FOR OPERATION LEVER, HEATING OPERATION | ||
| HEX. HEAD SCREW | ||
| M 4X12 DIN 933-8 G FOR BEARING AT JACKET PLATE, GLOVE BOX | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR BEARING AT JACKET PLATE, GLOVE BOX | ||
| 045 | A 101808300036 | HANDLE |
| FOR OPERATION OF HEATING AND VENTILATION | ||
| 046 | A 101808330091 | RUBBER SLEEVE |
| 047 | A 1809970881 | RUBBER SLEEVE |
| FOR WIRE CABLE, CONTROL COCK THROUGH FRONT WALL | ||
| 048 | A 121368310089 | FIXING SCREW |
| FOR WIRE CABLE, FLAP AT OPERATING LEVER | ||
| 049 | A 1360720050 | BUSHING |
| FOR WIRE CABLE, FLAP AT OPERATING LEVER | ||
| WASHER | ||
| 4,3 DIN 433 FOR WIRE CABLE, FLAP AT OPERATING LEVER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE, FLAP AT OPERATING LEVER | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE, FLAP AT OPERATING LEVER | ||
| A 121368310089 | FIXING SCREW | |
| FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER | ||
| A 1360720050 | BUSHING | |
| FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER | ||
| WASHER | ||
| 4,3 DIN 433 FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER | ||
| HEX. NUT | ||
| M 4 DIN 934 - 5 S FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER | ||
| 055 | A 101208300754 | ANNULAR NOZZLE, LEFT |
| FOR AIR OUTLET, VENTILATION OF SIDE WINDOWS | ||
| 056 | A 101208300854 | ANNULAR NOZZLE, RIGHT |
| FOR AIR OUTLET, VENTILATION OF SIDE WINDOWS | ||
| A 101208310024 | FLAP | |
| NO LONGER DELIVERED AS SPARE PART | ||
| A 101808310015 | PIN | |
| NO LONGER DELIVERED AS SPARE PART | ||
| A 101868310034 | PRESSURE SPRING | |
| NO LONGER DELIVERED AS SPARE PART | ||
| LOCKING WASHER | ||
| 2,3 DIN 6799 NO LONGER DELIVERED AS SPARE PART | ||
| 060 | A 101208310032 | WIRE CLAMP |
| FOR ANNULAR NOZZLE AT INSTRUMENT PANEL | ||
| 061 | A 1209931610 | TENSION SPRING |
| FOR ANNULAR NOZZLE AT INSTRUMENT PANEL | ||
| 062 | A 101208310388 | HOSE |
| FROM AIR DUCT TO DEFROSTER NOZZLE | ||
| 063 | A 101208310188 | HOSE |
| FROM ANNULAR NOZZLE TO DEFROSTER NOZZLE | ||
| 064 | A 101208310026 | TRANSFER FITTING |
| FROM DEFROSTER NOZZLE TO HOSE FOR VENTILATION OF SIDE WINDOW | ||
| 070 | A 101208300542 | CONTROL FLAP |
| FOR CROSS DUCT, LEFT AND RIGHT FOR HEATING AND VENTILATION AT FRONT WALL, BOTTOM, INSIDE | ||
| 071 | A 101208310034 | SPRING |
| FOR CONTROL FLAP | ||
| A 0009940645 | CLIP NUT | |
| LENS-HD. SHEET | ||
| METAL SCREW B 4,8X13 DIN 7981 FOR CONTROL FLAP AT CROSS DUCT | ||
| 072 | A 101208300115 | FEED PIPE |
| 073 | A 1218300016 | RETURN FLOW PIPE |
| A 1808300114 | BRACKET | |
| FOR FEED PIPE AND RETURN FLOW PIPE AT BODY FRONT END | ||
| A 101208300168 | FIXING CLAMP | |
| FOR FEED PIPE AND RETURN FLOW PIPE AT BODY FRONT END | ||
| 075 | A 101208300068 | FIXING CLAMP |
| FOR FEED PIPE AND RETURN FLOW PIPE AT BODY FRONT END | ||
| LENS-HD. SCREW | ||
| AM 6X15 DIN 7985-4 S FOR FIXING CLAMP AT BODY FRONT END | ||
| LENS-HD. SCREW | ||
| AM 6X15 DIN 7985-4 S FOR FIXING CLAMP AT BODY FRONT END | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR FIXING CLAMP AT BODY FRONT END | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR FIXING CLAMP AT BODY FRONT END | ||
| A 101808300850 | BRACKET | |
| FOR HEATING TUBE | ||
| COUNTERSUNK SCREW | ||
| AM 6X15 DIN 7987-4 S FOR BRACKET AT BODY FRONT END | ||
| HOSE STRAP | ||
| 5X0,35X210 MM LANG N 263 FOR FEED PIPE AND RETURN FLOW PIPE AT HOSE, HEAT EXCHANGER ORDER BY THE METER | ||
| HOSE CLAMP | ||
| WSN 5 N 262 FOR FEED PIPE AND RETURN FLOW PIPE AT HOSE, HEAT EXCHANGER | ||
| A 101808310097 | HOSE | |
| FOR FEED FLOW TO ENGINE, OR FOR RETURN FLOW TO ENGINE, RESP. | ||
| 076 | A 101208310197 | HOSE |
| FOR FEED FLOW TO ENGINE, OR FOR RETURN FLOW TO ENGINE, RESP. | ||
| HOSE STRAP | ||
| 5X0,35X230 MM LANG N 263 FOR HOSES AT ENGINE, FEED AND RETURN FLOW PIPE ORDER BY THE METER | ||
| HOSE CLAMP | ||
| WSN 5 N 262 FOR HOSES AT ENGINE, FEED AND RETURN FLOW PIPE | ||
| 080 | A 101208300301 | SCOOP, LEFT |
| 081 | A 101208300401 | SCOOP, RIGHT |
| 083 | A 101208300718 | INSECT SCREEN, |
| LEFT AND RIGHT | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 4,8X16 DIN 7981 FOR INSECT SCREEN AT SCOOP, FRONT | ||
| WASHER | ||
| 5,3 DIN 125 FOR INSECT SCREEN AT SCOOP, FRONT | ||
| 084 | A 0009940745 | CLIP NUT |
| FOR INSECT SCREEN AT SCOOP, FRONT | ||
| HEX. -HD. SCREW | ||
| M 6X15 DIN 933-8 G FOR SCOOP AT WHEEL ARCH | ||
| 085 | A 0009870241 | RUBBER WASHER |
| FOR SCOOP AT WHEEL ARCH | ||
| 086 | A 1205450176 | WASHER |
| FOR SCOOP AT WHEEL ARCH | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR SCOOP AT WHEEL ARCH | ||
| 087 | A 0009902291 | CAGE CLIP WITH NUT |
| AT WHEEL ARCH | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| BLOWER-SECOND BLOWER-SPECIAL REQUEST | ||
| 090 | A 111208300208 | BLOWER |
| MAKE AVOG OPTIONAL WITH MAKE BOSCH | ||
| 091 | A 0008350175 | CARBON BRUSH |
| 092 | A 101208350185 | FAN |
| 093 | A 101208350128 | RUBBER MOUNTING |
| FOR FIXING BLOWER | ||
| A 1208300008 | BLOWER | |
| MAKE BOSCH OPTIONAL WITH MAKE AVOG | ||
| A 0008350185 | FAN | |
| A 0008350475 | CARBON BRUSH | |
| LENS-HD. SCREW | ||
| AM 5X15 DIN 7985-4S FOR BLOWER IN SCOOP | ||
| WASHER | ||
| 5,3 DIN 433 FOR BLOWER IN SCOOP | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR BLOWER IN SCOOP | ||
| 094 | A 1209970381 | RUBBER SLEEVE |
| IN CONNECTION FITTING FOR CABLE PASSAGE | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| ORNAMENTAL BARS | ||
| 100 | A 101218380736 | ORNAMENTAL BAR |
| FOR AIR INLET, TOP, LEFT FRONT AT ENGINE HOOD | ||
| 101 | A 101218380836 | ORNAMENTAL BAR |
| FOR AIR INLET, TOP, RIGHT FRONT AT ENGINE HOOD | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 2,9X6,5 DIN 7981 VERCHROMT FOR ORNAMENTAL BAR AT ENGINE HOOD | ||
| 103 | A 101218380936 | ORNAMENTAL BAR, |
| CENTER, LEFT FOR AIR INLET, FRONT, BESIDE RADIATOR GRILL | ||
| 104 | A 101218381036 | ORNAMENTAL BAR, |
| CENTER, RIGHT FOR AIR INLET, FRONT, BESIDE RADIATOR GRILL | ||
| LENS-HD. SCREW | ||
| AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, OUTSIDE | ||
| WASHER | ||
| A 4,3 DIN 9021 FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, OUTSIDE | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, OUTSIDE | ||
| HEX. NUT | ||
| M 4 DIN 934 - 5 S FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, OUTSIDE | ||
| LENS-HD. SCREW | ||
| AM 4X18 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, CENTER | ||
| A 0009841155 | WASHER | |
| FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, CENTER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, CENTER | ||
| HEX. NUT | ||
| M 4 DIN 934 - 5 S FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, CENTER | ||
| 105 | A 101218381136 | ORNAMENTAL BAR, |
| BOTTOM, LEFT FOR AIR INLET, FRONT BESIDE RADIATOR GRILL | ||
| 106 | A 101218381236 | ORNAMENTAL BAR, |
| BOTTOM, RIGHT FOR AIR INLET, FRONT BESIDE RADIATOR GRILL | ||
| LENS-HD. SCREW | ||
| AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, OUTSIDE | ||
| WASHER | ||
| A 4,3 DIN 9021 FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, OUTSIDE | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, OUTSIDE | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, OUTSIDE | ||
| LENS-HD. SCREW | ||
| AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, CENTER | ||
| WASHER | ||
| A 4,3 DIN 125 FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, CENTER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, CENTER | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, CENTER | ||
| LENS-HD. SCREW | ||
| AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, BOTTOM AT REINFORCEMENT BRACKET | ||
| WASHER | ||
| 4,3 DIN 125 FOR ORNAMENTAL BAR, BOTTOM AT REINFORCEMENT BRACKET | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR ORNAMENTAL BAR, BOTTOM AT REINFORCEMENT BRACKET |
© 2010-2013 UAB "RPV" Paslaugų teikimo sąlygos - Privatumo politika - Kopijuoti ir naudoti komerciniais tikslais draudžiama