automobilių detalių žinynas
 | Viso detalių : 0 |
Mano miestas
Pagrindinis meniu
Transporto priemonė: TYP 190SL BM 121.040, .042; VIN numerio dalis: 121040
Grupė: 83 HEATING AND VENTILATION
| # | Kodas | Pavadinimas |
|---|---|---|
| X XXXXXXXXXXXX | PART NAME MISSING | |
| HEATING AND VENTILATION | ||
| 001 | A 401218300962 | AIR DUCT, LEFT |
| A 101808310314 | BRACKET | |
| (FOR LEFT BOWDEN CABLE) | ||
| 004 | A 101808310043 | FLAP, TOP |
| FOR AIR DUCT | ||
| 005 | A 101808310143 | FLAP, BOTTOM |
| FOR AIR DUCT | ||
| 006 | A 101808310048 | SPINDLE |
| FOR AIR DUCT | ||
| 007 | A 101808310082 | RING |
| (BETWEEN DUCT AND SPINDLE) SPINDLE TO AIR DUCT | ||
| WASHER | ||
| 5,3 DIN 125 SPINDLE TO AIR DUCT | ||
| 008 | A 101808300156 | LEVER (FOR UPPER FLAP) |
| 009 | A 101808300056 | LEVER (FOR LOWER FLAP) |
| THREADED PIN | ||
| (LEVER TO SPINDLE) M 4X6 DIN 553 | ||
| 012 | A 401218300205 | DISTRIBUTOR, RIGHT |
| 013 | A 0009872851 | RUBBER MOULDING |
| ORDER BY THE METER FOR STOP AT FRESH-AIR FLAP, FRONT, 230-MM LONG FOR STOP AT FRESH-AIR FLAP, REAR, 100-MM LONG | ||
| 014 | A 401218300143 | FRESH-AIR FLAP |
| (FOR DISTRIBUTOR) | ||
| 015 | A 401218310148 | SPINDLE |
| 016 | A 101208310082 | BUSHING |
| (SPINDLE TO DISTRIBUTOR) | ||
| WASHER | ||
| 5,3 DIN 125 | ||
| HEX. NUT | ||
| A M 5 DIN 439 | ||
| 017 | A 101208310033 | LEVER |
| THREADED PIN | ||
| (LEVER TO SPINDLE) M 4X6 DIN 553 | ||
| 020 | A 401218350101 | HEAT EXCHANGER, LEFT |
| 021 | A 401218350301 | HEAT EXCHANGER, RIGHT |
| A 401218350320 | CONTROL VALVE, LEFT | |
| 022 | A 1218350020 | CONTROL VALVE, LEFT |
| A 401218350120 | CONTROL VALVE, RIGHT | |
| 023 | A 0008350098 | GASKET |
| (O-RING IN CONTROL VALVE) | ||
| A 0009832192 | PART NAME MISSING | |
| A 101208310193 | INTERMEDIATE LAYER, | |
| 12X60X125-MM FOR HEAT EXCHANGERS | ||
| A 0009830298 | INTERMEDIATE LAYER, | |
| 12X60X125-MM FOR HEAT EXCHANGERS STATE LENGTH AND WIDTH WHEN ORDERING | ||
| A 0009831710 | FELT STRIP, | |
| BLACK, 10X1X385-MM LONG FOR HEAT EXCHANGERS STATE LENGTH AND WIDTH WHEN ORDERING | ||
| A 401218300050 | BRACKET | |
| 024 | A 101208350092 | RUBBER SEAL |
| HEAT EXCHANGER AND BRACKET TO AIR DUCT | ||
| LENS HEAD SCREW | ||
| A M 5X15 DIN 7985 HEAT EXCHANGER AND BRACKET TO AIR DUCT | ||
| LENS HEAD | ||
| SHEET METAL SCREW B 4,8X19 DIN 7981 HEAT EXCHANGER AND BRACKET TO AIR DUCT | ||
| LENS HEAD SCREW | ||
| A M 5X10 DIN 7985 HEAT EXCHANGER TO DISTRIBUTOR | ||
| LOCK WASHER | ||
| B 5 DIN 127 HEAT EXCHANGER TO DISTRIBUTOR | ||
| A 401218300421 | CONNECTION FITTING, | |
| RIGHT, WITH ANTISQUEAK | ||
| 025 | A 401218300621 | CONNECTION FITTING, |
| RIGHT, WITH ANTISQUEAK | ||
| LENS HEAD SCREW | ||
| A M 5X10 DIN 7985 CONNECTION FITTING TO HEAT EXCHANGER | ||
| LOCK WASHER | ||
| B 5 DIN 127 CONNECTION FITTING TO HEAT EXCHANGER | ||
| A 401218330031 | PART NAME MISSING | |
| A 401218330131 | WIRE CABLE | |
| (FOR LEFT UPPER AND LOWER FRESH-AIR FLAPS) | ||
| 028 | A 401218330331 | WIRE CABLE |
| (FOR LEFT UPPER AND LOWER FRESH-AIR FLAPS) | ||
| 029 | A 0009880172 | CABLE CASING, 575 MM LONG |
| ORDER BY THE METER | ||
| INSULATING HOSE, | ||
| 520-MM LONG B 5X6,2 SW DIN 40 621 ORDER BY THE METER | ||
| LOCK PLATE | ||
| (WIRE CABLES TO FRESH-AIR FLAPS) 4 DIN 6799 | ||
| 030 | A 1369950601 | MOUNTING CLAMP |
| WIRE CABLES TO AIR DUCT | ||
| LENS HEAD SCREW | ||
| A M 4X10 DIN 7985 WIRE CABLES TO AIR DUCT | ||
| LOCK WASHER | ||
| B 4 DIN 127 WIRE CABLES TO AIR DUCT | ||
| A 1369950601 | MOUNTING CLAMP | |
| LEFT WIRE CABLE CONTROL ON AIR DUCT | ||
| LENS HEAD SCREW | ||
| A M 4X12 DIN 7985 LEFT WIRE CABLE CONTROL ON AIR DUCT | ||
| LOCK WASHER | ||
| B 4 DIN 127 LEFT WIRE CABLE CONTROL ON AIR DUCT | ||
| A 401218330231 | WIRE CABLE, | |
| 650-MM LONG (FOR LOWER RIGHT DISTRIBUTOR FLAP) | ||
| 031 | A 401218330431 | WIRE CABLE, |
| 650-MM LONG (FOR LOWER RIGHT DISTRIBUTOR FLAP) | ||
| 032 | A 0009880172 | CABLE CASING, 490 MM LONG |
| ORDER BY THE METER | ||
| INSULATING HOSE, | ||
| 460-MM LONG B 5X6,2 SW DIN 40 621 ORDER BY THE METER | ||
| 033 | A 121368310089 | ATTACHING SCREW |
| WIRE CABLE TO DISTRIBUTOR FLAP | ||
| 034 | A 121368310090 | BUSHING |
| WIRE CABLE TO DISTRIBUTOR FLAP | ||
| WASHER | ||
| 4,3 DIN 433 WIRE CABLE TO DISTRIBUTOR FLAP | ||
| LOCK WASHER | ||
| B 4 DIN 127 WIRE CABLE TO DISTRIBUTOR FLAP | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S WIRE CABLE TO DISTRIBUTOR FLAP | ||
| 035 | A 1369950601 | MOUNTING CLAMP |
| WIRE CABLE TO DISTRIBUTOR | ||
| LENS HEAD SCREW | ||
| A M 4X10 DIN 7985 WIRE CABLE TO DISTRIBUTOR | ||
| LOCK WASHER | ||
| B 4 DIN 127 WIRE CABLE TO DISTRIBUTOR | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S WIRE CABLE TO DISTRIBUTOR | ||
| 040 | A 401218330331 | WIRE CABLE |
| (FOR LEFT CONTROL COCK) | ||
| 041 | A 401218330431 | WIRE CABLE |
| (FOR RIGHT CONTROL COCK) | ||
| 042 | A 0009880172 | CABLE CASING, |
| 1,160-MM LONG, LEFT ORDER BY THE METER | ||
| A 0009880172 | CABLE CASING, | |
| 1,090-MM LONG, RIGHT ORDER BY THE METER | ||
| INSULATING HOSE, | ||
| 1,100-MM LONG, LEFT B 5X6,2 SW DIN 40 621 ORDER BY THE METER | ||
| INSULATING HOSE, | ||
| 1,030-MM LONG, RIGHT B 5X6,2 SW DIN 40 621 ORDER BY THE METER | ||
| LOCK PLATE | ||
| (WIRE CABLE TO CONTROL COCK) 4 DIN 6799 | ||
| 044 | A 1369950601 | MOUNTING CLAMP |
| (WIRE CABLE TO AIR DUCT) | ||
| LENS HEAD SCREW | ||
| A M 4X10 DIN 7985 WIRE CABLE TO CONTROL COCK | ||
| LOCK WASHER | ||
| B 4 DIN 127 WIRE CABLE TO CONTROL COCK | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S WIRE CABLE TO CONTROL COCK | ||
| 045 | A 1369950601 | MOUNTING CLAMP |
| WIRE CABLE TO DISTRIBUTOR | ||
| HEX. HEAD SCREW | ||
| M 4X10 DIN 931-8 G WIRE CABLE TO DISTRIBUTOR | ||
| LOCK WASHER | ||
| B 4 DIN 127 WIRE CABLE TO DISTRIBUTOR | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S WIRE CABLE TO DISTRIBUTOR | ||
| CABLE BRACKET | ||
| (WIRE CABLE CONTROL TO AIR FLAP WIRE CABLE) A 5X0,3X135 N 286 | ||
| A 401218300521 | CONNECTION FITTING, | |
| LEFT, WITH ANTISQUEAK (BETWEEN CONNECTION HOSE AND AIR DUCT, TO HOLD BLOWER) | ||
| 046 | A 401218300121 | CONNECTION FITTING, LEFT |
| 050 | A 111208300208 | BLOWER, 12 |
| VOLT (IN CASE OF L.H. DRIVE ON THE LEFT, IN CASE OF R.H. DRIVE ON THE RIGHT) FROM MESSRS. AVOG OPTIONAL WITH 120 830 00 | ||
| 051 | A 0008350175 | CARBON BRUSH |
| 052 | A 101208350185 | IMPELLER (4 BLADES) |
| 053 | A 101208350128 | RUBBER MOUNTING, |
| SPOKE (FOR BLOWER MOUNTING) | ||
| A 1208300008 | BLOWER, 12 | |
| VOLT FROM MESSRS. BOSCH OPTIONAL WITH 11 120 830 02 08 | ||
| A 0008350185 | IMPELLER | |
| A 0008350475 | CARBON BRUSH | |
| LENS HEAD SCREW | ||
| A M 5X15 DIN 7985 DBL 8451-21 BLOWER TO CONNECTION FITTING | ||
| WASHER | ||
| 5,8 DIN 126 DBL 8451-11 BLOWER TO CONNECTION FITTING | ||
| LOCK WASHER | ||
| B 5 DIN 127 DBL 8451-11 BLOWER TO CONNECTION FITTING | ||
| 054 | A 0009971981 | GROMMET |
| (IN CONNECTION FITTING) | ||
| 055 | A 101208300129 | TIGHTENING STRAP |
| (FOR LEFT AIR DUCT) | ||
| LENS HEAD SCREW | ||
| A M 6X25 DIN 7985 TIGHTENING STRAP TO AIR DUCT AND CONNECTION FITTING | ||
| LOCK WASHER | ||
| B 6 DIN 127 TIGHTENING STRAP TO AIR DUCT AND CONNECTION FITTING | ||
| WASHER | ||
| 6,4 DIN 125 TIGHTENING STRAP TO AIR DUCT AND CONNECTION FITTING | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S TIGHTENING STRAP TO AIR DUCT AND CONNECTION FITTING | ||
| A 0009870144 | PLUG | |
| ONLY APPLICABLE IF BLOWER IS NOT INSTALLED | ||
| A 0009871840 | RUBBER BUFFER | |
| ONLY APPLICABLE IF BLOWER IS NOT INSTALLED | ||
| A 401218310294 | PART NAME MISSING | |
| A 101218310194 | HOSE, 550-MM | |
| LONG (FOR HEAT EXCHANGER, TOP AND BOTTOM) | ||
| 060 | A 131368310494 | HOSE, 550-MM |
| LONG (FOR HEAT EXCHANGER, TOP AND BOTTOM) TO BE SHORTENED DURING ASSEMBLY AS REQUIRED | ||
| 060 | A 131368310494 | HOSE, 550-MM |
| LONG (FOR HEAT EXCHANGER, TOP AND BOTTOM) TO BE SHORTENED DURING ASSEMBLY AS REQUIRED | ||
| 061 | HOSE, 50-MM | |
| LONG (FOR HEAT EXCHANGER, BOTTOM, LEFT AND RIGHT) N900271 012018 C22 | ||
| 061 | HOSE, 50-MM | |
| LONG (FOR HEAT EXCHANGER, BOTTOM, LEFT AND RIGHT) N900271 012018 C22 | ||
| HOSE STRAP | ||
| 5X0,35X140 N 263 HOSE TO HEAT EXCHANGER | ||
| HOSE CLAMP | ||
| WSN 5 N 262 HOSE TO HEAT EXCHANGER | ||
| 062 | A 401218310199 | RUBBER SEAL |
| (BETWEEN AIR DUCT AND COWL) | ||
| 063 | A 101208310599 | RUBBER SEAL |
| (BETWEEN COWL AND DISTRIBUTOR) | ||
| A 0009831092 | PAD, WOOL | |
| FELT, GREY (FOR AIR DUCT) ORDER BY THE METER | ||
| LENS HEAD SCREW | ||
| A M 6X18 DIN 7985 DBL 8451-21 AIR DUCT TO COWL | ||
| LENS HEAD SCREW | ||
| A M 6X30 DIN 7985 DBL 8451-21 AIR DUCT TO COWL | ||
| WASHER | ||
| 6,4 DIN 125 DBL 8451-11 AIR DUCT TO COWL | ||
| HEX. HEAD SCREW | ||
| M 6X70 DIN 931-8 G DBL 8451-21 AIR DUCT TO COWL | ||
| LENS HEAD SCREW | ||
| A M 6X15 DIN 7985 DBL 8451-21 DISTRIBUTOR TO COWL | ||
| WASHER | ||
| 6,4 DIN 125 DBL 8451-11 DISTRIBUTOR TO COWL | ||
| A 101808300018 | INSECT SCREEN (LEFT SIDE) | |
| 064 | A 101808300418 | INSECT SCREEN (LEFT SIDE) |
| 065 | A 401218300018 | INSECT SCREEN |
| (RIGHT SIDE) | ||
| WING SCREW | ||
| M 6X12 DIN 316 MG INSECT SCREEN TO CONNECTION FITTING OR SCOOP, RESP. | ||
| LOCK WASHER | ||
| B 6 DIN 127 INSECT SCREEN TO CONNECTION FITTING OR SCOOP, RESP. | ||
| A 401218300119 | DEFROSTER NOZZLE, LEFT | |
| A 401218300519 | DEFROSTER NOZZLE, LEFT | |
| 066 | A 401218300919 | DEFROSTER NOZZLE, LEFT |
| 066 | A 401218300919 | DEFROSTER NOZZLE, LEFT |
| 067 | A 401218300419 | DEFROSTER NOZZLE, RIGHT |
| A 401218300719 | DEFROSTER NOZZLE, RIGHT | |
| A 401218301119 | DEFROSTER NOZZLE, RIGHT | |
| 068 | A 401218300043 | FRESH-AIR FLAP |
| FOR RIGHT DEFROSTER NOZZLE | ||
| A 401218310048 | SPINDLE | |
| FOR RIGHT DEFROSTER NOZZLE | ||
| 069 | A 401218310148 | SPINDLE |
| FOR RIGHT DEFROSTER NOZZLE | ||
| 070 | A 101208310082 | RING |
| SPINDLE TO RIGHT DEFROSTER NOZZLE | ||
| WASHER | ||
| 5,3 DIN 125 SPINDLE TO RIGHT DEFROSTER NOZZLE | ||
| HEX. NUT | ||
| A M 5 DIN 439 SPINDLE TO RIGHT DEFROSTER NOZZLE | ||
| 071 | A 101208310033 | LEVER |
| (FOR RIGHT DEFROSTER NOZZLE) | ||
| THREADED PIN | ||
| (LEVER TO SPINDLE) M 4X6 DIN 553 | ||
| 072 | A 401218330531 | WIRE CABLE, |
| RIGHT, TOP (FOR RIGHT DEFROSTER NOZZLE) | ||
| 073 | A 121368310089 | ATTACHING SCREW |
| WIRE CABLE TO RIGHT DEFROSTER NOZZLE | ||
| 074 | A 121368310090 | BUSHING |
| WIRE CABLE TO RIGHT DEFROSTER NOZZLE | ||
| WASHER | ||
| 4,3 DIN 433 WIRE CABLE TO RIGHT DEFROSTER NOZZLE | ||
| LOCK WASHER | ||
| B 4 DIN 127 WIRE CABLE TO RIGHT DEFROSTER NOZZLE | ||
| HEX. NUT | ||
| B M 4 DIN 439 WIRE CABLE TO RIGHT DEFROSTER NOZZLE | ||
| A 0009894585 | TEROSTAT CORD, | |
| 20X2-MM (DEFROSTER NOZZLES TO COWL) ORDER BY THE METER | ||
| LENS HEAD SCREW | ||
| A M 5X15 DIN 7985 DEFROSTER NOZZLES TO COWL | ||
| WASHER | ||
| A 5,3 DIN 9021 DEFROSTER NOZZLES TO COWL | ||
| LOCK WASHER | ||
| B 5 DIN 127 DEFROSTER NOZZLES TO COWL | ||
| 075 | A 401218310099 | GROMMET |
| (DEFROSTER NOZZLE PASSAGE THROUGH COWL) | ||
| 080 | A 401218300112 | OPERATION |
| (FOR VENTILATION ON THE LEFT) | ||
| 081 | A 401218300212 | OPERATION |
| (FOR VENTILATION ON THE RIGHT) | ||
| 082 | A 101868880034 | PRESSURE SPRING |
| 083 | A 121368310089 | ATTACHING SCREW |
| WIRE CABLES TO OPERATING LEVER | ||
| 084 | A 1360720050 | BUSHING |
| WIRE CABLES TO OPERATING LEVER | ||
| WASHER | ||
| 4,3 DIN 125 WIRE CABLES TO OPERATING LEVER | ||
| LOCK WASHER | ||
| B 4 DIN 127 WIRE CABLES TO OPERATING LEVER | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S WIRE CABLES TO OPERATING LEVER | ||
| 085 | A 401218300312 | OPERATION, CENTER |
| (FOR HEATING) | ||
| 086 | A 101868880034 | PRESSURE SPRING |
| 087 | A 121368310089 | ATTACHING SCREW |
| CENTER WIRE CABLE TO OPERATING LEVER | ||
| 088 | A 1360720050 | BUSHING |
| CENTER WIRE CABLE TO OPERATING LEVER | ||
| WASHER | ||
| 4,3 DIN 125 DBL 8451-11 CENTER WIRE CABLE TO OPERATING LEVER | ||
| LOCK WASHER | ||
| B 4 DIN 127 DBL 8451-21 CENTER WIRE CABLE TO OPERATING LEVER | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S DBL 8451-21 CENTER WIRE CABLE TO OPERATING LEVER | ||
| 089 | A 401218300089 | ESCUTCHEON, LATERAL, |
| LEFT AND RIGHT (FOR VENTILATION) | ||
| A 401218300189 | ESCUTCHEON, CENTER | |
| (FOR HEATING) | ||
| 090 | A 401218300289 | ESCUTCHEON, CENTER |
| (FOR HEATING) | ||
| HEX. HEAD SCREW | ||
| M 6X8 DIN 933-8 G ESCUTCHEONS AND OPERATIONS TO INSTRUMENT PANEL | ||
| 091 | A 401218330017 | SPACER RING |
| ESCUTCHEONS AND OPERATIONS TO INSTRUMENT PANEL | ||
| WASHER | ||
| 6,4 DIN 125 ESCUTCHEONS AND OPERATIONS TO INSTRUMENT PANEL | ||
| TOOTHED WASHER | ||
| A 6,4 DIN 6797 ESCUTCHEONS AND OPERATIONS TO INSTRUMENT PANEL | ||
| A 101808300036 | HANDLE | |
| (FOR HEATING OPERATION) | ||
| 092 | A 1208300036 | HANDLE |
| (FOR HEATING OPERATION) | ||
| A 101808330091 | GROMMET | |
| 093 | A 1118330340 | HANDLE |
| (FOR HEATING OPERATION) | ||
| 094 | A 1369950601 | MOUNTING CLAMP |
| WIRE CABLES TO COWL | ||
| HEX. HEAD SCREW | ||
| M 4X10 DIN 931-8 G DBL 8451-21 WIRE CABLES TO COWL | ||
| LOCK WASHER | ||
| B 4 DIN 127 DBL 8451-11 WIRE CABLES TO COWL | ||
| A 1869970681 | GROMMET | |
| FOR WIRE CABLES | ||
| 095 | A 1809970881 | GROMMET |
| FOR WIRE CABLES | ||
| A 0009971881 | GROMMET | |
| FOR WIRE CABLES | ||
| 096 | A 1809971181 | GROMMET |
| FOR WIRE CABLES | ||
| A 401218310088 | CONNECTION HOSE, | |
| 185-MM LONG (FOR SCOOP AND CONNECTION FITTING) | ||
| 097 | A 401218310488 | CONNECTION HOSE, |
| 185-MM LONG (FOR SCOOP AND CONNECTION FITTING) | ||
| HOSE STRAP | ||
| 9X0,4X930 N 263 CONNECTING HOSE TO CONNECTION FITTING | ||
| HOSE CLAMP | ||
| WSN 9 N 262 CONNECTING HOSE TO CONNECTION FITTING | ||
| 098 | A 401218310388 | HOSE, 390-MM |
| LONG (AT DISTRIBUTOR, RIGHT SIDE, BETWEEN CONNECTION FITTING AND SCOOP) | ||
| HOSE STRAP | ||
| 9X0,4X675 N 263 HOSE TO DISTRIBUTOR | ||
| HOSE CLAMP | ||
| WSN 9 N 262 HOSE TO DISTRIBUTOR | ||
| A 401218310188 | HOSE, 250-MM | |
| LONG (FOR DEFROSTER NOZZLE) | ||
| 099 | A 401218310588 | HOSE, 250-MM |
| LONG (FOR DEFROSTER NOZZLE) | ||
| HOSE STRAP | ||
| 9X0,4X500 N 263 HOSE TO DEFROSTER NOZZLE | ||
| HOSE CLAMP | ||
| WSN 9 N 262 HOSE TO DEFROSTER NOZZLE | ||
| 100 | A 401218300015 | FEED LINE |
| 101 | A 401218300016 | RETURN LINE |
| 102 | A 1869950037 | MOUNTING CLAMP |
| RETURN LINE TO WHEEL ARCH PANEL | ||
| LENS HEAD SCREW | ||
| A M 6X15 DIN 7985 RETURN LINE TO WHEEL ARCH PANEL | ||
| LOCK WASHER | ||
| B 6 DIN 127 RETURN LINE TO WHEEL ARCH PANEL | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S RETURN LINE TO WHEEL ARCH PANEL | ||
| LENS HEAD SCREW | ||
| A M 6X15 DIN 7985 FEED LINE AND RETURN LINE TO COWL | ||
| LOCK WASHER | ||
| B 6 DIN 127 FEED LINE AND RETURN LINE TO COWL | ||
| A 401218310097 | REPLACED BY | |
| 16X3,5X210 DIN 73 411 | ||
| A 111208310097 | REPLACED BY | |
| 16X3,5X210 DIN 73 411 | ||
| 103 | HOSE | |
| (FOR FEED LINE AND RETURN LINE) 16X3,5X210 DIN 73 411 | ||
| HOSE STRAP | ||
| 5X0,35X140 N 263 HOSES TO FEED LINE AND RETURN LINE AS WELL AS TO ENGINE | ||
| HOSE CLAMP | ||
| WSN 5 N 262 HOSES TO FEED LINE AND RETURN LINE AS WELL AS TO ENGINE |
© 2010-2013 UAB "RPV" Paslaugų teikimo sąlygos - Privatumo politika - Kopijuoti ir naudoti komerciniais tikslais draudžiama