automobilių detalių žinynas
 | Viso detalių : 0 |
Mano miestas
Pagrindinis meniu
Transporto priemonė: TYP 219 BM 105.010, .011; VIN numerio dalis: 105011
Grupė: 83 HEATING AND VENTILATION
| # | Kodas | Pavadinimas |
|---|---|---|
| X XXXXXXXXXXXX | PART NAME MISSING | |
| HEATING AND VENTILATION | ||
| A 101808300021 | CONNECTING FITTING | |
| BETWEEN HOSE AND AIR DUCT FOR MOUNTING OF BLOWER | ||
| 001 | A 101808300121 | CONNECTING FITTING |
| BETWEEN HOSE AND AIR DUCT FOR MOUNTING OF BLOWER | ||
| A 0009870144 | LOCKING WASHER | |
| CABLE PASSAGE FOR BLOWER | ||
| 004 | A 101808310188 | HOSE |
| BETWEEN SCOOP AND CONNECTING FITTING | ||
| HOSE STRAP | ||
| 9X0,4X920 MM LANG N 263 FOR HOSE TO AIR DUCT AND SCOOP ORDER BY THE METER | ||
| HOSE CLAMP | ||
| WSN 9 N 262 FOR HOSE TO AIR DUCT AND SCOOP | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| BLOWER | ||
| 005 | A 111208300208 | BLOWER, 12 VOLT |
| MAKE AVOG 2ND BLOWER, SPECIAL REQUEST OPTIONAL WITH MAKE BOSCH | ||
| 006 | A 0008350175 | CARBON BRUSH |
| MAKE AVOG | ||
| 007 | A 101208350185 | FAN BLADE |
| MAKE AVOG | ||
| 008 | A 101208350128 | RUBBER MOUNTING |
| FOR BLOWER MOUNTING MAKE AVOG | ||
| A 1208300008 | BLOWER, 12 VOLT | |
| MAKE BOSCH OPTIONAL WITH MAKE AVOG | ||
| A 0008350185 | FAN BLADE | |
| MAKE BOSCH | ||
| A 0008350475 | CARBON BRUSH | |
| MAKE BOSCH | ||
| LENS-HD. SCREW | ||
| AM 5X15 DIN 7985-4S FOR BLOWER TO CONNECTING FITTING | ||
| WASHER | ||
| 5,3 DIN 433 FOR BLOWER TO CONNECTING FITTING | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR BLOWER TO CONNECTING FITTING | ||
| 009 | A 0009971981 | GROMMER |
| IN CONNECTING FITTING FOR CABLE PASSAGE | ||
| 010 | A 101208301762 | AIR DUCT, LEFT |
| 011 | A 101208300462 | AIR DUCT, RIGHT |
| 014 | A 101208310033 | LEVER |
| 016 | A 101208310048 | AXLE |
| FOR AIR FLAP | ||
| 018 | A 101208310043 | FLAP |
| FOR AIR DUCT | ||
| 019 | A 101208310082 | BEARING BUSHING |
| THREADED PIN | ||
| M 4X6 DIN 553-5 S FOR LEVER TO AXLE | ||
| WASHER | ||
| 5,3 DIN 125 FOR AXLE TO AIR DUCT | ||
| HEX. NUT | ||
| AM 5 DIN 439-5 S FOR AXLE TO AIR DUCT | ||
| 020 | A 101808310199 | SEALING RUBBER |
| BETWEEN AIR DUCT AT FRONT WALL | ||
| A 101208310392 | INTERMEDIATE LAYER | |
| FOR TIGHTENING STRAP TO AIR DUCT NO LONGER INSTALLED | ||
| A 101208310793 | INTERMEDIATE LAYER | |
| FOR TIGHTENING STRAP TO AIR DUCT NO LONGER INSTALLED | ||
| LENS-HD. SCREW | ||
| AM 6X15 DIN 7985-4 S FOR AIR DUCT TO FRONT WALL | ||
| HEX. -HD. SCREW | ||
| M 6X65 DIN 931-8 G FOR AIR DUCT TO FRONT WALL | ||
| WASHER | ||
| 6,4 DIN 125 FOR AIR DUCT TO FRONT WALL | ||
| 025 | A 101208300129 | TIGHTENING STRAP |
| FOR AIR DUCT | ||
| LENS-HD. SCREW | ||
| AM 6X22 DIN 7985-4 S FOR TIGHTENING STRAP TO AIR DUCT | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR TIGHTENING STRAP TO AIR DUCT | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR TIGHTENING STRAP TO AIR DUCT | ||
| A 101808300018 | INSECT SCREEN | |
| UP TO CHASSIS 6505198 | ||
| 026 | A 101808300418 | INSECT SCREEN |
| FROM CHASSIS 6505199 | ||
| WING SCREW | ||
| M 6X12 DIN 316-4 D FOR INSECT SCREEN TO SCOOP | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR INSECT SCREEN TO SCOOP | ||
| A 0009902291 | CAGE CLIP WITH NUT | |
| FOR INSECT SCREEN TO SCOOP | ||
| 027 | A 101208350501 | HEAT EXCHANGER, LEFT |
| 028 | A 101208350601 | HEAT EXCHANGER, RIGHT |
| 28a | A 1208350120 | REGULATING VALVE, LEFT |
| 28b | A 1208350220 | REGULATING VALVE, RIGHT |
| 029 | A 0008350098 | GASKET |
| O-RING IN REGULATING VALVE, LEFT AND RIGHT | ||
| A 0009832192 | PART NAME MISSING | |
| A 101208310193 | INTERMEDIATE LAYER | |
| FOR HEAT EXCHANGER "MOLTOPREN" | ||
| A 0009830298 | INTERMEDIATE LAYER | |
| FOR HEAT EXCHANGER "MOLTOPREN" ORDER BY THE METER | ||
| A 101806870012 | ANGLE | |
| SEE GROUP 68, TABLE 43 | ||
| A 101208300050 | BRACKET | |
| FOR BOWDEN CABLE | ||
| 031 | A 1208300050 | BRACKET |
| FOR BOWDEN CABLE | ||
| 032 | A 101208350092 | SEALING RUBBER |
| FOR HEAT EXCHANGER AND BRACKET TO AIR DUCT | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 4,8X19 DIN 7981 FOR HEAT EXCHANGER AND BRACKET TO AIR DUCT | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 4,8X22 DIN 7981 FOR HEAT EXCHANGER AND BRACKET TO AIR DUCT | ||
| WASHER | ||
| A 5,3 DIN 9021 FOR HEAT EXCHANGER AND BRACKET TO AIR DUCT | ||
| A 101208330131 | REPLACED BY | |
| III 1,25 Ø DIN 2076 | ||
| 033 | WIRE | |
| III 1,25 Ø DIN 2076 FOR VENTILATION FLAP 460 MM LONG ORDER BY THE METER | ||
| 035 | A 0009880172 | WIRE SPIRAL, 395 MM LONG |
| FOR FLAP ORDER BY THE METER | ||
| 036 | INSULATING HOSE, | |
| 350-MM LONG B 5X6,2 SW DIN 40621 ORDER BY THE METER | ||
| 037 | A 1369950601 | FIXING CLAMP |
| FOR WIRE CABLE TO AIR DUCT | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985-4S FOR WIRE CABLE TO AIR DUCT | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE TO AIR DUCT | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE TO AIR DUCT | ||
| 038 | A 121368310089 | FIXING SCREW |
| FOR WIRE CABLE TO FLAP | ||
| 039 | A 121368310090 | BUSHING |
| FOR WIRE CABLE TO FLAP | ||
| WASHER | ||
| 4,3 DIN 433 FOR WIRE CABLE TO FLAP | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE TO FLAP | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE TO FLAP | ||
| 040 | A 101208300542 | REGULATING FLAP, |
| LEFT AND RIGHT IN CROSS DUCT FOR HEATING AND VENTILATION AT FRONT WALL, BOTTOM, INSIDE | ||
| 041 | A 101208310034 | SPRING |
| FOR REGULATING FLAP | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 4,8X13 DIN 7981 FOR REGULATING FLAP TO CROSS DUCT | ||
| 042 | A 0009940645 | CLIP NUT |
| A 101208300554 | RING NOZZLE, LEFT | |
| FOR AIR OUTLET, SIDE PANE VENTILATION | ||
| 045 | A 101208300754 | RING NOZZLE, LEFT |
| FOR AIR OUTLET, SIDE PANE VENTILATION | ||
| A 101208300654 | RING NOZZLE, RIGHT | |
| FOR AIR OUTLET, SIDE PANE VENTILATION | ||
| 046 | A 101208300854 | RING NOZZLE, RIGHT |
| FOR AIR OUTLET, SIDE PANE VENTILATION | ||
| A 101208310024 | FLAP | |
| A 101208310015 | PIN WITH HANDLE | |
| A 101808310015 | PIN | |
| A 101868310034 | PRESSURE SPRING | |
| 049 | A 101208310032 | WIRE CLAMP |
| FOR RING NOZZLE TO INSTRUMENT PANEL | ||
| 050 | A 1209931610 | RETURN SPRING |
| FOR RING NOZZLE TO INSTRUMENT PANEL | ||
| 051 | A 101208310188 | HOSE, 160 MM LONG |
| FROM RING NOZZLE TO DEFROSTER NOZZLE | ||
| A 101208310288 | HOSE | |
| FROM AIR DUCT TO DEFROSTER NOZZLE | ||
| 052 | A 101208310388 | HOSE |
| FROM AIR DUCT TO DEFROSTER NOZZLE | ||
| 053 | A 101208310026 | CONNECTING PART |
| FOR DEFROSTER NOZZLE AT HOSE, SIDE PANE VENTILATION | ||
| A 101208300115 | FEED PIPE | |
| 060 | A 101808300215 | FEED PIPE |
| A 101808300115 | FEED PIPE | |
| 061 | A 101808300016 | RETURN PIPE |
| A 101808300116 | RETURN PIPE | |
| 062 | A 1869950037 | FIXING CLAMP |
| FOR RETURN PIPE TO WHEEL ARCH | ||
| LENS-HD. SCREW | ||
| AM 6X15 DIN 7985-4S FOR RETURN PIPE TO WHEEL ARCH | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR RETURN PIPE TO WHEEL ARCH | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR RETURN PIPE TO WHEEL ARCH | ||
| A 101808300750 | BRACKET | |
| FOR HEATING TUBE | ||
| 063 | A 101808300650 | BRACKET |
| FOR HEATING TUBE | ||
| A 101808301050 | BRACKET | |
| FOR HEATING TUBE | ||
| INSULATING HOSE, | ||
| 15-MM LONG B 10X11,4 SW DIN 40621 ORDER BY THE METER | ||
| A 0009833192 | INTERMEDIATE LAYER | |
| STATE LENGTH AND WIDTH WHEN ORDERING | ||
| COUNTERSUNK SCREW | ||
| AM 6X15 DIN 7987-4S FOR BRACKET TO BODY FRONT END | ||
| A 101808300168 | PART NAME MISSING | |
| A 101808300550 | FIXING CLAMP | |
| 064 | A 101208300068 | FIXING CLAMP |
| LENS-HD. SCREW | ||
| AM 6X12 DIN 7985-4 S FOR FIXING CLAMP TO BODY FRONT END | ||
| WASHER | ||
| 6,4 DIN 125 FOR FIXING CLAMP TO BODY FRONT END | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR FIXING CLAMP TO BODY FRONT END | ||
| A 101208300020 | BRACKET | |
| FOR FUSE BOX AS SPARE PART NO LONGER AVAILABLE | ||
| 065 | A 101208310094 | HOSE, 175 MM LONG |
| FOR FEED PIPE FROM PIPE TO HEAT EXCHANGER, BOTTOM | ||
| 066 | A 101208310194 | HOSE, 80 MM LONG |
| FOR RETURN PIPE FROM PIPE TO HEAT EXCHANGER, TOP | ||
| HOSE STRAP | ||
| 5X0,35X210 MM LANG N 263 FOR HOSE TO HEAT EXCHANGER, TOP AND BOTTOM ORDER BY THE METER | ||
| HOSE CLAMP | ||
| WSN 5 N 262 FOR HOSE TO HEAT EXCHANGER, TOP AND BOTTOM ORDER BY THE METER | ||
| A 101808310097 | HOSE, 250 MM LONG | |
| FOR FEED PIPE FROM PIPE TO ENGINE, TOP | ||
| 067 | A 101808310197 | HOSE, 250 MM LONG |
| FOR FEED PIPE FROM PIPE TO ENGINE, TOP | ||
| 068 | A 101808310197 | HOSE, 250 MM LONG |
| FOR RETURN PIPE FROM PIPE TO ENGINE, BOTTOM | ||
| HOSE STRAP | ||
| 5X0,35 N 263 FOR HOSE TO FEED PIPE AND RETURN PIPE ORDER BY THE METER | ||
| HOSE CLAMP | ||
| WSN 5 N 262 FOR HOSE TO FEED PIPE AND RETURN PIPE | ||
| 069 | A 101208301133 | OPERATION, LEFT |
| FOR VENTILATION CONTROL AND HEATING CONTROL | ||
| 070 | A 101208301233 | OPERATION, RIGHT |
| FOR VENTILATION CONTROL AND HEATING CONTROL | ||
| 073 | A 1369950601 | FIXING CLAMP |
| HEX. -HD. SCREW | ||
| M 4X15 DIN 931-8 G FOR FIXING CLAMP TO OPERATION | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR FIXING CLAMP TO OPERATION | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR FIXING CLAMP TO OPERATION | ||
| HEX. -HD. SCREW | ||
| M 4X12 DIN 933-8 G FOR OPERATION, MOUNTING ANGLE TO INSTRUMENT PANEL | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR OPERATION, MOUNTING ANGLE TO INSTRUMENT PANEL | ||
| A 0009902591 | CAGE CLIP WITH NUT | |
| FOR OPERATION, MOUNTING ANGLE TO INSTRUMENT PANEL | ||
| 73a | A 1208330114 | MOUNTING, LEFT |
| FOR OPERATION LEVER, HEATING FROM CHASSIS 9503577 | ||
| A 1208330214 | MOUNTING, RIGHT | |
| FOR OPERATION LEVER, HEATING FROM CHASSIS 9503577 | ||
| HEX. -HD. SCREW | ||
| M 4X12 DIN 933-8 G FOR MOUNTING TO COVER PLATE FOR GLOVE BOX FROM CHASSIS 9503577 | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR MOUNTING TO COVER PLATE FOR GLOVE BOX FROM CHASSIS 9503577 | ||
| 074 | A 101808300036 | HANDLE |
| FOR OPERATION OF HEATING AND VENTILATION | ||
| 075 | A 101808330091 | RUBBER CAP |
| A 1869970681 | GROMMET | |
| FOR WIRE CABLE, FLAP THROUGH FRONT WALL UP TO CHASSIS 7504599 | ||
| A 0009971881 | GROMMET | |
| FOR WIRE CABLE, CONTROL COCK THROUGH FRONT WALL UP TO CHASSIS 7504599 | ||
| 75a | A 1809970881 | GROMMET |
| FOR WIRE CABLE, CONTROL COCK THROUGH FRONT WALL FROM CHASSIS 7504600 | ||
| 076 | A 121368310089 | FIXING SCREW |
| FOR WIRE CABLE, FLAP AND CONTROL COCK TO OPERATION LEVER | ||
| 077 | A 1360720050 | BUSHING |
| FOR WIRE CABLE, FLAP AND CONTROL COCK TO OPERATION LEVER | ||
| WASHER | ||
| 4,3 DIN 433 FOR WIRE CABLE, FLAP AND CONTROL COCK TO OPERATION LEVER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE, FLAP AND CONTROL COCK TO OPERATION LEVER | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE, FLAP AND CONTROL COCK TO OPERATION LEVER | ||
| A 101208330331 | WIRE CABLE, LEFT | |
| AT CONTROL COCK | ||
| 080 | A 401218330331 | WIRE CABLE, LEFT |
| AT CONTROL COCK | ||
| A 101208330431 | WIRE CABLE, RIGHT | |
| AT CONTROL COCK | ||
| 081 | A 401218330431 | WIRE CABLE, RIGHT |
| AT CONTROL COCK | ||
| 082 | A 0009880172 | WIRE SPIRAL, 565 MM LONG |
| ORDER BY THE METER | ||
| 083 | INSULATING HOSE, | |
| 520-MM LONG B 5X6,2 SW DIN 40621 ORDER BY THE METER | ||
| LOCKING WASHER | ||
| 4 DIN 6799 FOR WIRE CABLE TO CONTROL COCK | ||
| 084 | A 1369950601 | FIXING CLAMP |
| FOR WIRE CABLE TO HEAT EXCHANGER | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985-4 S FOR WIRE CABLE TO HEAT EXCHANGER | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR WIRE CABLE TO HEAT EXCHANGER | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR WIRE CABLE TO HEAT EXCHANGER |
© 2010-2013 UAB "RPV" Paslaugų teikimo sąlygos - Privatumo politika - Kopijuoti ir naudoti komerciniais tikslais draudžiama