automobilių detalių žinynas
 | Viso detalių : 0 |
Mano miestas
Pagrindinis meniu
Transporto priemonė: TYP 300 Sc BM 188.013 - .015; VIN numerio dalis: 188014
Grupė: 57 CENTRAL LUBRICATION
| # | Kodas | Pavadinimas |
|---|---|---|
| X XXXXXXXXXXXX | PART NAME MISSING | |
| CENTRAL LUBRICATION | ||
| 001 | A 0005711901 | SHOT LUBRICATION PUMP |
| 003 | HEX. -HD. SCREW | |
| M 6X18 DIN 933-8 G FOR SHOT LUBRICATION PUMP AT DASHBOARD | ||
| 004 | LOCK WASHER | |
| B 6 DIN 127 FOR SHOT LUBRICATION PUMP AT DASHBOARD | ||
| 005 | HEX. NUT | |
| M 6 DIN 934 - 5 S FOR SHOT LUBRICATION PUMP AT DASHBORAD | ||
| 006 | A 0005710104 | REFILLING CONTAINER |
| WITH BRACKET | ||
| 007 | A 0005710120 | STRAINER |
| 008 | A 0005710603 | COVER |
| 009 | A 0005710180 | SEAL |
| 010 | LOCK WASHER | |
| B 6 DIN 127 FOR BRACKET AT DASHBOARD | ||
| 011 | HEX. -HD. SCREW | |
| M 6X10 DIN 933-8 G FOR BRACKET AT DASHBOARD | ||
| 012 | A 1885700040 | BRACKET |
| FOR REFILLING CONTAINER | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| CENTRAL LUBRICATION LINES | ||
| 020 | A 0005736320 | OIL DISTRIBUTOR, LEFT |
| 021 | A 0005736420 | OIL DISTRIBUTOR, RIGHT |
| 024 | HEX. -HD. SCREW | |
| M 6X18 DIN 933-8 G FOR OIL DISTRIBUTOR AT BRACKET, FRAME | ||
| 025 | LOCK WASHER | |
| B 6 DIN 127 FOR OIL DISTRIBUTOR AT BRACKET, FRAME | ||
| 026 | HEX. NUT | |
| M 6 DIN 934-5 S FOR OIL DISTRIBUTOR AT BRACKET, FRAME | ||
| 027 | LUBE OIL | |
| LINE FROM REFILLING CONTAINER TO SHOT LUBRICATION PUMP 400-MM LG. 8X0,75 DIN 2391 OR BUNDY TUBE 8X0,8 STATE LENGTH WHEN | ||
| 027 | LUBE OIL | |
| LINE FROM SHOT LUBRICATION PUMP TO DISTRIBUTOR, LEFT 780-MM LG. 8X0,75 DIN 2391 OR BUNDY TUBE 8X0,8 STATE LENGTH WHEN OR | ||
| 027 | LUBE OIL | |
| LINE FROM TEE, LEFT AND DISTRIBUTOR, RIGHT 1515-MM LG. 8X0,75 DIN 2391 OR BUNDY TUBE 8X0,8 STATE LENGTH WHEN ORDERING | ||
| 027 | LUBE OIL | |
| LINE FROM DISTRIBUTOR, RIGHT, TO DISTRIBUTOR FOR PROPELLER SHAFT AND REAR AXLE 2520-MM LG. 8X0,75 DIN 2391 OR BUNDY TUBE | ||
| 028 | SEALING CONE | |
| 8,1 DIN 71426 | ||
| 029 | PIPE SCREW JOINT | |
| 8,2 DIN 71426 | ||
| 030 | TEE | |
| AM 8X1 DIN 71432 | ||
| 031 | HEX. -HD. SCREW | |
| M 6X18 DIN 933-8 G FOR TEE AT BRACKET, FRAME | ||
| 032 | LOCK WASHER | |
| B 6 DIN 127 FOR TEE AT BRACKET, FRAME | ||
| 033 | HEX. NUT | |
| M 6 DIN 934-5 S FOR TEE AT BRACKET, FRAME | ||
| 034 | MOUNTING CLAMP | |
| A 8,2 DIN 71434 FOR LUBE OIL LINE 8 MM | ||
| 035 | HEX. -HD. TAP SCREW | |
| AM 5X10 DIN 7513 FOR LUBE OIL LINE 8 MM | ||
| 036 | LOCK WASHER | |
| B 5 DIN 127 FOR LUBE OIL LINE 8 MM | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO BRACKET, TEE, FRONT, LEFT 570-MM LONG, FRONT, RIGHT 710-MM LONG 4X0,75 DIN 2391 OR BUNDY TUBE 4 | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO BRACKET, TUBE CONNECTOR, FOR CLUTCH BEARING 510-MM LONG 4X0,75 DIN 2391 OR BUNDY TUBE 4X0,8 STA | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO INTERM. LEVER MOUNTING 490-MM LONG 4X0,75 DIN 2391 OR BUNDY TUBE 4X0,8 STATE LENGTH WHEN ORDERI | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO BRACKET, TUBE CONNECTOR 420-MM LONG 4X0,75 DIN 2391 OR BUNDY TUBE 4X0,8 STATE LENGTH WHEN ORDER | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO PIVOT PIN, WISHBONE, TOP, LEFT 380-MM LONG, TOP, RIGHT 500-MM LONG 4X0,75 DIN 2391 OR BUNDY TUB | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO PIVOT PIN, WISHBONE, BOTTOM, LEFT 405-MM LONG, BOTTOM, RIGHT 495-MM LONG 4X0,75 DIN 2391 OR BUN | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO BRACKET, TUBE CONNECTOR, FOR PROPELLER SHAFT/INTERM. BEARING 850-MM LONG 4X0,75 DIN 2391 OR BUN | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO PIVOT PIN, WISHBONE, TOP, LEFT AND RIGHT 90-MM LONG 4X0,75 DIN 2391 OR BUNDY TUBE 4X0,8 STATE L | ||
| 040 | LUBE OIL | |
| LINE FROM DISTRIBUTOR TO PIVOT PIN, WISHBONE, BOTTOM, LEFT AND RIGHT 280-MM LONG 4X0,75 DIN 2391 OR BUNDY TUBE 4X0,8 STA | ||
| 040 | LUBE OIL | |
| LINE FOR WISHBONE PIN, TOP 70-MM LONG, BOTTOM, 92-MM LONG 4X0,75 DIN 2391 OR BUNDY TUBE 4X0,8 STATE LENGTH WHEN ORDERING | ||
| 041 | SEALING CONE | |
| 4,1 DIN 71426 FOR LUBE OIL LINES 4 MM | ||
| 042 | PIPE SCREW JOINT | |
| 4,2 DIN 71426 FOR LUBE OIL LINES 4 MM | ||
| 043 | A 1369950020 | MOUNTING CLAMP |
| FOR LUBE OIL LINE FROM TEE, FRONT, RIGHT, AT FRAME AND FROM FRONT DISTRIBUTOR, RIGHT, TO FRONT AXLE | ||
| 044 | HEX. -HD. SCREW | |
| AM 5X10 DIN 7513 FOR LUBE OIL LINE FROM TEE, FRONT, RIGHT, AT FRAME AND FROM FRONT DISTRIBUTOR, RIGHT, TO FRONT AXLE | ||
| 045 | LOCK WASHER | |
| B 5 DIN 127 FOR LUBE OIL LINE FROM TEE, FRONT, RIGHT, AT FRAME AND FROM FRONT DISTRIBUTOR, RIGHT, TO FRONT AXLE | ||
| 046 | HEX. NUT | |
| M 14X1,5 DIN 936-5 S | ||
| 047 | LOCK WASHER | |
| 14,5 DIN 71431 | ||
| 048 | CONNECTION HOSE | |
| 4X460 DIN 71435 FOR LUBE OIL LINE FROM DISTRIBUTOR TO STEERING INTERM LEVER | ||
| 049 | CONNECTION HOSE | |
| 4X300 DIN 71435 FOR LUBE OIL LINE FROM DISTRIBUTOR TO STEERING INTERM LEVER | ||
| 050 | CONNECTION HOSE | |
| 4X380 DIN 71435 FOR LUBE OIL LINE FROM TEE TO DISTRIBUTOR, KING PIN | ||
| 052 | TUBE CONNECTOR | |
| AM 14X1,5X26 DIN 71429 | ||
| 056 | A 0005738920 | OIL DISTRIBUTOR |
| FOR REAR AXLE | ||
| 057 | HEX. -HD. SCREW | |
| M 6X18 DIN 933-8 G FOR OIL DISTRIBUTOR AT FRAME | ||
| 058 | LOCK WASHER | |
| B 6 DIN 127 FOR OIL DISTRIBUTOR AT FRAME | ||
| 059 | TUBE CONNECTOR | |
| AM 14X1,5X26 DIN 71429 FOR LUBE OIL LINE, PROPELLER SHAFT, INTERM. BEARING FROM DISTRIBUTOR TO BRACKET, TUBE CONNECTOR | ||
| 060 | LOCK WASHER | |
| 14,5 DIN 71431 FOR LUBE OIL LINE, PROPELLER SHAFT, INTERM. BEARING FROM DISTRIBUTOR TO BRACKET, TUBE CONNECTOR | ||
| 061 | HEX. NUT | |
| M 14X1,5 DIN 936-5 S FOR LUBE OIL LINE, PROPELLER SHAFT, INTERM. BEARING FROM DISTRIBUTOR TO BRACKET, TUBE CONNECTOR | ||
| 062 | CONNECTION HOSE | |
| 4X460 DIN 71435 FOR PROPELLER SHAFT INTERM. BEARING | ||
| 063 | MOUNTING CLAMP | |
| A 4,2 DIN 71434 FOR LUBE OIL LINE, PROPELLER SHAFT BEARING AT FRAME | ||
| 064 | HEX. -HD. SCREW | |
| AM 5X10 DIN 7513 FOR LUBE OIL LINE, PROPELLER SHAFT BEARING AT FRAME | ||
| 065 | LOCK WASHER | |
| B 5 DIN 127 FOR LUBE OIL LINE, PROPELLER SHAFT BEARING AT FRAME | ||
| 066 | A 0005730125 | TEE |
| FOR LUBRICATION OF SINGLE-JOINT REAR AXLE | ||
| 068 | CONNECTION HOSE | |
| 4X220 DIN 71435 FOR LUBRICATION LINE FROM TEE TO SINGLE-JOINT REAR AXLE | ||
| 069 | HEX. -HD. SCREW | |
| M 6X15 DIN 933-8 G FOR TEE AT REAR AXLE | ||
| 070 | LOCK WASHER | |
| B 6 DIN 127 FOR TEE AT REAR AXLE | ||
| 071 | THROUGH-WAY FITTING | |
| AM 8X1 DIN 71432 FOR THROUGH-WAY FITTING AT FRAME | ||
| 072 | HEX. -HD. SCREW | |
| M 6X18 DIN 933-8 G FOR THROUGH-WAY FITTING AT FRAME | ||
| 073 | LOCK WASHER | |
| B 6 DIN 127 FOR THROUGH-WAY FITTING AT FRAME | ||
| 077 | A 0005737420 | OIL DISTRIBUTOR, LEFT |
| 078 | A 0005737520 | OIL DISTRIBUTOR, RIGHT |
| 079 | A 1839970340 | SEAL |
| FOR OIL DISTRIBUTOR AT FRONT AXLE PIN | ||
| 080 | CASTLE NUT | |
| M 10X1 DIN 937-5 S FOR OIL DISTRIBUTOR AT FRONT AXLE PIN | ||
| 081 | COTTER PIN | |
| 2X22 DIN 94 FOR OIL DISTRIBUTOR AT FRONT AXLE PIN | ||
| 082 | CONNECTION FITTING | |
| AM 8X1X16 DIN 71428 | ||
| 083 | SEAL | |
| A 8X12 DIN 7603 A1 | ||
| 084 | TEE | |
| A 12 DIN 71433 |
© 2010-2013 UAB "RPV" Paslaugų teikimo sąlygos - Privatumo politika - Kopijuoti ir naudoti komerciniais tikslais draudžiama